Connection of the USB-connector on the distributor board to the plug and socket on the generator box. 

Suitable for following machines: ISG2410WK1, ISG2430TLK, ISG2430TWK, ISG3410WK1, ISG3410WK4, ISG3430TLK, ISG3430TLK4, ISG3430TWK, ISG4410WK1, ISG4410WK2

Connection of the LAN-connector on the control board to the plug and socket on the generator box (RJ45).

The ejection device enables broken tools to be removed easily from chucks. Even tools where the point of breakage is in the tool holder can be removed without difficulty. 

Suitable for all interfaces and shrink machines.

For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.

For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.

For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.

For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.

For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.

Variable, mechanical length adjustment, can be precisely adjusted to the required tool length. Suitable for all clamping sizes with suitable shrink adaptor. 

For water cooled shrink machines only the basic adaptor [5020330] T…-WWK/TER is needed. An additional adaptor [5051118] T...-W/TER in combination with the basic holder [5020330] T…-WWK/TER is required for air colled shrink machines.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

 Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG3400 Series.

For optimal shielding of the magnetic field between coil and tool shank. 

Suitable for ISG2400 Series.