Form optimisation leads to an increase in the life and load capacity of the holder through a uniform structure throughout. The bearing structure of our ThermoGrip® Bionic shrink chucks has been designed based on the growth form of trees, meaning that notch stress is avoided and only as much material is used as is required. A tree is stabilised on the windward side by means of its root system, and exactly this method has been used by our engineers to develop an exceptional shrink chuck with extremely high bending strength.

• Maximum bending strength due to the bionic contour
• Increased rigidity
• Counterbore – the Thermogrip® trademark
• Improved surface quality due to optimal chip removal
• Run-out quality • Higher feed rates and greater cutting depth
• Increased torque transmission
• Lockable Cool Jet holes for peripheral cooling and balance screw holes for fine balancing as standard

Form optimisation leads to an increase in the life and load capacity of the holder through a uniform structure throughout. The bearing structure of our ThermoGrip® Bionic shrink chucks has been designed based on the growth form of trees, meaning that notch stress is avoided and only as much material is used as is required. A tree is stabilised on the windward side by means of its root system, and exactly this method has been used by our engineers to develop an exceptional shrink chuck with extremely high bending strength.

• Maximum bending strength due to the bionic contour
• Increased rigidity
• Counterbore – the Thermogrip® trademark
• Improved surface quality due to optimal chip removal
• Run-out quality • Higher feed rates and greater cutting depth
• Increased torque transmission
• Lockable Cool Jet holes for peripheral cooling and balance screw holes for fine balancing as standard

Form optimisation leads to an increase in the life and load capacity of the holder through a uniform structure throughout. The bearing structure of our ThermoGrip® Bionic shrink chucks has been designed based on the growth form of trees, meaning that notch stress is avoided and only as much material is used as is required. A tree is stabilised on the windward side by means of its root system, and exactly this method has been used by our engineers to develop an exceptional shrink chuck with extremely high bending strength.

• Maximum bending strength due to the bionic contour
• Increased rigidity
• Counterbore – the Thermogrip® trademark
• Improved surface quality due to optimal chip removal
• Run-out quality • Higher feed rates and greater cutting depth
• Increased torque transmission
• Lockable Cool Jet holes for peripheral cooling and balance screw holes for fine balancing as standard

Form optimisation leads to an increase in the life and load capacity of the holder through a uniform structure throughout. The bearing structure of our ThermoGrip® Bionic shrink chucks has been designed based on the growth form of trees, meaning that notch stress is avoided and only as much material is used as is required. A tree is stabilised on the windward side by means of its root system, and exactly this method has been used by our engineers to develop an exceptional shrink chuck with extremely high bending strength.

• Maximum bending strength due to the bionic contour
• Increased rigidity
• Counterbore – the Thermogrip® trademark
• Improved surface quality due to optimal chip removal
• Run-out quality • Higher feed rates and greater cutting depth
• Increased torque transmission
• Lockable Cool Jet holes for peripheral cooling and balance screw holes for fine balancing as standard

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels.

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion

ThermoGrip Cool Jet® Cool Jet stands for optimised coolant supply through closable side channels. 

• Demand-orientated cooling of the cutting edge 
• Optimized air and lubricant feed 
• Longer tool life due to constant tool preserving cutting temperatures at the cutting edge 
• Improved surface quality due to optimal chip removal – no second chip cutting 
• Excellent usability in shrinking and insertion