Includes a lockable stop valve, micro filter with water trap and manometer. With the stop valve the pressure of the unit can be switched off. During varying or bad pressure quality, the microfilter guarantees a reliable operation of the shrink unit. 

Suitable for the following machines: ISG2410WK1, ISG3410WK1, ISG3410WK4, ISG3430TLK4, ISG4410WK1, ISG4410WK2

The XL tank replaces the standard tank and increases the coolant volume by 33%. 

Suitable for the following machines: ISG2410WK1, ISG3410WK1, ISG3410WK4

High quality Corian cover instead of the standard rubber mat. Placement positions for 4 pole discs and 2 tool adapters.

Side storage table with rubber mat for better comfort. 

Suitable for following machines: ISG2410WK1, ISG3410Wk1, ISG3410WK4

Bilz RFID evaluation unit with handheld chip reader and holder. 

Suitable for following machines: ISG2410WK1, ISG2430TWK, ISG3410WK1, ISG3410WK4, ISG3430TLK4, ISG3430TWK, ISG4410WK1, ISG4410WK2

Maintenance Window provides security and transparency during cooling process. 

Suitable for following machines: ISG3410WK1, ISG3410WK4

Side storage table with Corian plate for better comfort. 

Suitable for following machines: ISG2410WK1, ISG3410Wk1, ISG3410WK4

Identification location tray for pole discs ISGS3201-0 up to 3 (Ø 3 – 32 mm). During automatic shrinking the suitable pole disc is displayed via LED in the tray. 

Suitable for the following machines: ISG2410WK1, ISG2430TWK, ISG3410WK1, ISG3410WK4, ISG3430TLK4, ISG3430TWK

Specially adapted coil geometry for optiomum heat transfer to the stainless shrink fit chuck. The scope of delivery includes the clamping ring with bayonet lock, ferrite discs not included. 

Suitable for 3400WK-WS series only. 

Following discs are available: 
For tool diameter less than 9mm : 5174378 
For tool diameter less than 6mm : 5174087 
For tool diameter less than 3mm : 5174387

Coil for large tool shank diamaters range from 32mm - 50mm

This optional feature is available only for ISG3410WK & ISG3430TLK4-WS shrink machines.

The IRIS adjustable coil represents the latest innovation in ThermoGrip shrink-fit technology, designed to meet the demands of modern manufacturing processes while reducing operating costs.

This advanced coil features fast diameter adjustment capabilities, eliminating the need for time-consuming disc changes and significantly reducing set-up times. Intuitive user interface and maintenance-friendly design make it extremely user-friendly, with segments that can be replaced by customers without needing to send the coil for service.

This optional feature is available only for non-fixed coil shrink machines ("WS" models).

Lateral steam extraction, separate 230V connection; suction nozzle positioned manually; suction capacity adjustable; replaceable filter unit. 

Suitable for the following machines: ISG2410WK1, ISG3410WK1, ISG3410WK4

Balluff BIS-C evaluation unit with handheld chip reader and holder. Available on request, additional clarification necessary. 

Suitable for following machines: ISG2410WK1, ISG2430TWK, ISG3410WK1, ISG3410WK4, ISG3430TLK4, ISG3430TWK, ISG4410WK1, ISG4410WK2

Application / Features 
• Length presetting for easy adjustment of projecting length and the total dimension 
• Quick and easy handling 
• Adjustment accuracy +/- 0.05 mm (for maximum accuracy, please use separate adapter) 
• Total measuring length 600 mm, other lengths on request 
• Increased safety due to end position detection of the length preset 

Suitable for following machines: ISG2410WK1, ISG3410WK1, ISG3410WK4

The ejection device enables broken tools to be removed easily from chucks. Even tools where the point of breakage is in the tool holder can be removed without difficulty. 

Suitable for all interfaces and shrink machines.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

 Suitable for tool length up to 120mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length up to 120mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length up to 120mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length up to 120mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter.

Suitable for tool length up to 120mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length up to 120mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length of 120 - 160mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length of 120 - 160mm.

For fast cooling of the heated shrink chucks. Due to prceise design and the enclosure of clamping area, the heat is rapidly diverted to the outside via the fins of the adapter. 

Suitable for tool length of 120 - 160mm.