1. Products
  2. Shrink Collets
Comprehensive Pricelist
Sort By: Featured

Shrink Collets

TER16-2 - TER Collet Holder
For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.
TER20-2 - TER Collet Holder
For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.
TER25-2 - TER Collet Holder
For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.
TER32-2 - TER Collet Holder
For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.
TER11-2 - TER Collet Holder
For safe holding of TER shrink fit collet. 

Suitable for basic adaptor [5020330] T...-WWK/TER.
T3-W/55x114x70 - Length Adjustment Adaptor
Variable, mechanical length adjustment, can be precisely adjusted to the required tool length. Suitable for all clamping sizes with suitable shrink adaptor. 

For water cooled shrink machines only the basic adaptor [5020330] T…-WWK/TER is needed. An additional adaptor [5051118] T...-W/TER in combination with the basic holder [5020330] T…-WWK/TER is required for air cooled shrink machines.
T3-WWK/TER - Tool Holder
Variable, mechanical length adjustment, can be precisely adjusted to the required tool length. Suitable for all clamping sizes with suitable shrink adaptor. 

For water cooled shrink machines only the basic adaptor [5020330] T…-WWK/TER is needed. An additional adaptor [5051118] T...-W/TER in combination with the basic holder [5020330] T…-WWK/TER is required for air colled shrink machines.
TMG20-10-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-12-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-14-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-3-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-4-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-5-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-6-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-8-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-10-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-12-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-14-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-8-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-3-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-4-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-5-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-6-K1 - TMG Collet with Internal Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.
TMG20-16-C1 - TMG Collet with Peripheral Coolant Feed
The Bilz TMG clamping system combines the best features of both shrink clamping technology and collet solutions. This innovative system is compatible with a wide range of shank tools (2-32mm) and can achieve impressive clamping forces, such as over 850 Nm for a 20 mm tool shank. The patented TMG Shrink Chuck allows for fully automatic or manual operation on induction shrink fit machines, ensuring seamless integration into your existing workshop setup.